PicoScope 9200 Oscilloscope Specifications
| Channels (vertical) | |
|---|---|
| Channels | 2 (simultaneous acquisition) |
| Bandwidth | DC to 12 GHz |
| Pulse response rise time | 29.2 ps |
| RMS noise, maximum | <2.5 mV |
| Scale factors (sensitivity) | 2 mV/div to 500 mV/div |
| Nominal input impedance | (50 ±1) Ω |
| Input connectors | SMA (F) |
| Timebase (horizontal) | |
|---|---|
| Timebases | 10 ps/div to 2 ms/div (main, intensified, two delayed, or dual delayed) |
| Delta time interval accuracy | ±0.4% of delta time interval ±15 ps ±100 ppm of delay setting |
| Time interval resolution | 200 fs minimum |
| Trigger | |
|---|---|
| Trigger sources | External direct trigger, external prescaled trigger, internal clock trigger, clock recovery trigger (9211 only) |
| Direct trigger bandwidth and sensitivity | 100 mV p-p DC to 100 MHz, increasing linearly from 100 mV p-p at 100 MHz to 400 mV p-p at 1 GHz |
| Prescaled trigger bandwidth and sensitivity | 200 mV p-p to 2 V p-p from 1 GHz to 8 GHz, 300 mV p-p to 1 V p-p to 10 GHz |
| Trigger RMS jitter, maximum | 3.5 ps 20 ppm of delay setting |
| Data Acquisition | |
|---|---|
| ADC resolution | 16 bits |
| Digitising rate | DC to 100 kHz maximum |
| Acquisition modes | Sample (normal), average, envelope |
| Data record length | 32 to 4096 points maximum per channel in x2 sequence |
| Display | |
|---|---|
| Display resolution | Variable |
| Display style | Dots, vectors, variable persistence, infinite persistence, variable grey scaling, infinite grey scaling, variable colour grading, infinite colour grading |
| Measurement and Analysis | |
|---|---|
| Marker | Vertical bars, horizontal bars (measure volts) or waveform markers (x and ) |
| Automatic measurements | Up to 40 automatic pulse measurements |
| Histogram | Vertical or horizontal |
| Mathematics | Up to four math waveforms can be defined and displayed |
| FFT | Up to two fast Fourier transforms can be run simultaneously with the built in filters (Rectangular, Nicolson, Hanning, Flattop, Blackman-Harris and Kaiser-Bessel) |
| Eye diagram | Automatically characterises NRZ and RZ eye patterns. Measurements are based on statistical analysis of the waveform. |
| Mask test | Acquired signals are tested for fit outside areas defined by up to eight polygons. Standard or user-defined masks can be selected. |
| Clock Recovery (PicoScope 9211 only) | |
|---|---|
| Sensitivity | 50 mV p-p typ from 12.3 Mb/s to 2.7 Gb/s continuous rate |
| Recover clock RMS trigger jitter, maximum | 1.0% of unit interval |
| Maximum safe trigger input voltage | ±2 V (DC peak AC) |
| Trigger input connector | SMA (F) |
| PC Requirements | |
|---|---|
| Processor | Pentium-class processor or equivalent |
| Memory | 256 MB |
| Disk space | PicoScope 9000 software requires aproximately 30 MB |
| Operating system | 32-bit edition of Windows XP (SP2) or Vista |
| Ports | USB compliant port minimum. USB 2.0 compliant port recommended. |
| Environmental | |
|---|---|
| Operating environment Temperature range Humidity |
5 °C to 35 °C for normal operation 15 °C to 30 °C for quoted accuracy Up to 85% RH, non-condensing, at 25 °C |
| Storage environment Temperature range Humidity |
-20 °C to 50 °C Up to 95% RH, non-condensing |
| Physical Dimensions | |
|---|---|
| Dimensions | 170 x 255 x 40 mm (6.7 x 10.0 x 1.6 in) |
| Weight | 1.0 kg (2.2 lb) |
| Language support | |
|---|---|
| Documentation User’s guide Quick start guide |
English English |
| General | |
|---|---|
| Supplied software/hardware | PicoScope 9000 Series software 2 x SMA M-F adapters/connector savers USB 2.0 cable LAN cable (PicoScope 9211 only) AC adaptor Tough carry case |
| PC connection | USB 2.0 (USB 1.1 compatible) - cable supplied |
| LAN connection | 10/100 Mb/s - cable supplied (PicoScope 9211 only) |
| Power supply AC adaptor |
6 V DC ±5%. 1.9 A max (2.3 A for PicoScope 9211) External adaptor supplied (suitable for USA, UK, Europe and Australasia) |
| Compliance | FCC (EMC), CE (EMC and LVD) |
| Total Satisfaction Guarantee | In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. |
| Warranty | 2 years |
| Ordering Information | ||
|---|---|---|
| Variant | PicoScope 9201 | PicoScope 9211 |
| Cat number | PP463 | PP473 |
| Lead time | Due to increased demand there is currently a 12 week lead time. Orders will be fulfilled in the order they are received. No payments are taken until goods are ready to be despatched. | |
