Live Support
Log In
Attention all Pico Automotive Scope software now sports a new Waveform Library browser. Must own PicoScope to view. See details here
Credit Cards Accepted
Aurora Probability in Northern Canada
North America Aurora Map from
Oscilloscope — Vertical
Model
PicoScope 2204APP906
PicoScope 2205APP907
PicoScope 2206APP908Replaced by 2206B
PicoScope 2207APP909Replaced by 2207B
PicoScope 2208APP910Replaced by 2208B
Bandwidth
10 MHz
25 MHz
50 MHz
100 MHz
200 MHz
Maximum sampling rate
100 MS/s
200 MS/s
500 MS/s
1 GS/s
1 GS/s
Buffer memory
8 kS
16 kS
32 kS
40 kS
48 kS
Function generator AWG
100 kHz
100 kHz
1 MHz
1 MHz
1 MHz
Rise time (calculated)
35 ns
14 ns
7 ns
3.5 ns
1.75 ns
Input channels
2
Vertical resolution
8 bits
Enhanced vertical resolution
Up to 12 bits
Input ranges
±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10 V, ±20 V
Input sensitivity
10 mV/div to 4 V/div (10 vertical divisions)
Input coupling
Software selectable AC/DC
Input characteristics
BNC, 1 MΩ ∥ 14 pF
BNC, 1 MΩ ∥ 13 pF
Analog offset range
none
±250 mV (50 mV to 200 mV ranges)
DC accuracy
±3% of full scale
Overvoltage protection
±100 V (DC AC peak)
Oscilloscope — Horizontal
Maximum sampling rate
Equivalent sampling rate (ETS)
2 GS/s
4 GS/s
5 GS/s
10 GS/s
10 GS/s
Maximum sampling rate
1 MS/s
9.6 MS/s
Timebase ranges
10 ns to 5000 s/div
5 ns to 5000 s/div
2 ns to 5000 s/div
1 ns to 5000 s/div
500 ps to 5000 s/div
Buffer memory
8 kS
16 kS
24 kS
32 kS
40 kS
Buffer memory (streaming mode)
MS per channel in PicoScope software.
100 MS (shared) in PicoScope software.
Waveform buffer
Timebase accuracy
±100 ppm
±50 ppm
Sample jitter
< 30 ps RMS
< 5 ps RMS
# Buffer memory is shared between active channels.
Dynamic Performance (typical)
Crosstalk (full bandwidth)
Better than 200:1 (equal ranges)
Better than 400:1 (equal ranges)
Harmonic distortion
< -50 dB at 100 kHz, full–scale input
SFDR > 52 dB at 100 kHz, full–scale input
Noise
< 150 μV RMS (±50 mV range)
< 200 μV RMS (±50 mV range)
Bandwidth flatness (at scope input)
( 0.3 dB, -3 dB) from DC to full bandwidth
Triggering
Sources
Ch A, Ch B
Trigger modes
None, auto, repeat, single
None, auto, repeat, single, rapid (segmented memory)
Advanced triggers
Edge, window, pulse width, window pulse width, dropout, window dropout, interval, logic.
Trigger types, ETS
Rising or falling edge
Trigger sensitivity
Digital triggering provides 1 LSB accuracy up to full bandwidth In ETS mode, typical 10 mV p-p at full bandwidth
Maximum pre–trigger capture
100% of capture size
Maximum post–trigger delay
4 billion samples
Trigger re–arm time
PC–dependent
< 2 µs on fastest timebase
Maximum trigger rate
PC–dependent
Up to 32 waveforms in a 64 μs burst
Function Generator
Standard output signals
Sine, square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine
Pseudorandom output signals
None
White noise, PRBS
Standard signal frequency
DC to 100 kHz
DC to 1 MHz
Sweep modes
Up, down, dual with selectable start/stop frequencies and increments
Output frequency accuracy
±100 ppm
±50 ppm
Output frequency resolution
< 0.01 Hz
Output voltage range
±2 V
Output adjustments
Any amplitude and offset within ±2 V range
Amplitude flatness (typical)
< 1 dB to 100 kHz
< 0.5 dB to 1 MHz
DC accuracy
±1% of full scale
SFDR
> 55 dB @ 1 kHz full–scale sine wave
> 60 dB @ 10 kHz full–scale sine wave
Connector type
Front panel BNC with 600 Ω output impedance
Overvoltage protection
±10 V
Arbitrary Waveform Generator
Update rate
2 MS/s
20 MS/s
Buffer size
4 kS
8 kS
Resolution
12 bits
Bandwidth
>100 kHz
>1 MHz
Rise time (10% to 90%)
< 2 µs
< 120 ns
Spectrum Analyser
Frequency range
DC to 10 MHz
DC to 25 MHz
DC to 50 MHz
DC to 100 MHz
DC to 200 MHz
Display modes
Magnitude, peak hold, average
Window types
Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat–top
Number of FFT points
Selectable from 128 to half the available buffer memory in powers of 2
Math Channels
Functions
−x, x y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, freq, derivative, integral, min, max, average, peak, delay
Operands
A, B (input channels), T (time), reference waveforms, constants, Pi
Automatic measurements
Scope mode
AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate.
Spectrum mode
Frequency at peak, amplitude at peak, average amplitude at peak,
Statistics
Minimum, maximum, average and standard deviation
Serial decoding
Protocols
CAN, LIN, I²C, UART/RS-232, SPI, I²S, FlexRay
Mask limit testing
Statistics
Pass/fail, failure count, total count
Display
Interpolation
Linear or sin(x)/x
Persistence modes
Digital color, analog intensity, custom, or none
General
PC connectivity
USB 2.0 (USB 1.1 and 3.0 compatible). USB cable included.
Power requirements
Powered from USB port
Dimensions (including connectors)
142 x 92 x 19 mm
Weight
< 0.2 kg (7 oz)
Temperature range
Operating: 0 °C to 50 °C (20 °C to 30 °C for stated accuracy). Storage: –20 °C to 60 °C.
Humidity range
Operating: 5% to 80% RH non-condensing. Storage: 5% to 95% RH non-condensing.
Safety approvals
Designed to EN 61010-1:2010
Compliance
RoHS, WEEE, and LVD compliant. Tested to meet EN61326-1:2006 and FCC Part 15 Subpart B.
Software included
PicoScope 6, Windows and Linux SDK, example programs (C, Visual Basic, Excel VBA, LabVIEW)
PicoScope software PC requirements
Microsoft Windows XP (SP3), Windows Vista, Windows 7 or Windows 8 (not Windows RT). 32- or 64-bit
Languages (manual)
Chinese (simplified), English, French, German, Italian, Spanish
Languages (software interface)
Chinese (simplified & traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian,
Buy the 2204A On Line Here (PP906):
Buy the 2205A On Line Here (PP907):
Buy the 2206A On Line Here (PP908):
Buy the 2207A On Line Here (PP909):
Buy the 2208A On Line Here (PP910):
Back to features page ->
